Php ref.stream () function

Write your php code

CXX. Stream Functions

Introduction

Streams were introduced with PHP 4.3.0 as a way of generalizing file, network, data compression, and other operations which share a common set of functions and uses. In its simplest definition, a stream is a resource object which exhibits streamable behavior. That is, it can be read from or written to in a linear fashion, and may be able to fseek() to an arbitrary locations within the stream.

A wrapper is additional code which tells the stream how to handle specific protocols/encodings. For example, the http wrapper knows how to translate a URL into an HTTP/1.0 request for a file on a remote server. There are many wrappers built into PHP by default (See Appendix L), and additional, custom wrappers may be added either within a PHP script using stream_wrapper_register(), or directly from an extension using the API Reference in Chapter 63. Because any variety of wrapper may be added to PHP, there is no set limit on what can be done with them. To access the list of currently registered wrappers, use stream_get_wrappers().

A stream is referenced as: scheme://target

scheme(string) - The name of the wrapper to be used. Examples include: file, http, https, ftp, ftps, compress.zlib, compress.bz2, and php. See Appendix L for a list of PHP builtin wrappers. If no wrapper is specified, the function default is used (typically file://).
target - Depends on the wrapper used. For filesystem related streams this is typically a path and filename of the desired file. For network related streams this is typically a hostname, often with a path appended. Again, see Appendix L for a description of targets for builtin streams.

Stream Filters

A filter is a final piece of code which may perform operations on data as it is being read from or written to a stream. Any number of filters may be stacked onto a stream. Custom filters can be defined in a PHP script using stream_filter_register() or in an extension using the API Reference in Chapter 63. To access the list of currently registered filters, use stream_get_filters().

Stream Contexts

A context is a set of parameters and wrapper specific options which modify or enhance the behavior of a stream. Contexts are created using stream_context_create() and can be passed to most filesystem related stream creation functions (i.e. fopen(), file(), file_get_contents(), etc...).

Options can be specified when calling stream_context_create(), or later using stream_context_set_option(). A list of wrapper specific options can be found with the list of built-in wrappers (See Appendix L).

In addition, parameters may be set on a context using stream_context_set_params(). Currently the only context parameter supported by PHP is notification. The value of this parameter must be the name of a function to be called when an event occurs on a stream. The notification function called during an event should accept the following six parameters:

void my_notifier ( int notification_code, int severity, string message, int message_code, int bytes_transferred, int bytes_max )

notification_code and severity are numerical values which correspond to the STREAM_NOTIFY_* constants listed below. If a descriptive message is available from the stream, message and message_code will be populated with the appropriate values. The meaning of these values is dependent on the specific wrapper in use. bytes_transferred and bytes_max will be populated when applicable.

Installation

Streams are an integral part of PHP as of version 4.3.0. No steps are required to enable them.

Stream Classes

User designed wrappers can be registered via stream_wrapper_register(), using the class definition shown on that manual page.

class php_user_filter is predefined and is an abstract baseclass for use with user defined filters. See the manual page for stream_filter_register() for details on implementing user defined filters.

Predefined Constants

The constants below are defined by this extension, and will only be available when the extension has either been compiled into PHP or dynamically loaded at runtime.

Constant	Syntax
`STREAM_FILTER_READ` *	Used with stream_filter_append() and stream_filter_prepend() to indicate that the specified filter should only be applied when reading
`STREAM_FILTER_WRITE` *	Used with stream_filter_append() and stream_filter_prepend() to indicate that the specified filter should only be applied when writing
`STREAM_FILTER_ALL` *	This constant is equivalent to `STREAM_FILTER_READ \| STREAM_FILTER_WRITE`
`PSFS_PASS_ON` *	`Return Code` indicating that the userspace filter returned buckets in `$out`.
`PSFS_FEED_ME` *	`Return Code` indicating that the userspace filter did not return buckets in `$out` (i.e. No data available).
`PSFS_ERR_FATAL` *	`Return Code` indicating that the userspace filter encountered an unrecoverable error (i.e. Invalid data received).
`STREAM_USE_PATH`	`Flag` indicating if the `stream` used the include path.
`STREAM_REPORT_ERRORS`	`Flag` indicating if the `wrapper` is responsible for raising errors using trigger_error() during opening of the stream. If this flag is not set, you should not raise any errors.
`STREAM_CLIENT_ASYNC_CONNECT` *	Open client socket asynchronously. This option must be used together with the `STREAM_CLIENT_CONNECT` flag. Used with stream_socket_client().
`STREAM_CLIENT_CONNECT` *	Open client socket connection. Client sockets should always include this flag. Used with stream_socket_client().
`STREAM_CLIENT_PERSISTENT` *	Client socket opened with stream_socket_client() should remain persistent between page loads.
`STREAM_SERVER_BIND` *	Tells a stream created with stream_socket_server() to bind to the specified target. Server sockets should always include this flag.
`STREAM_SERVER_LISTEN` *	Tells a stream created with stream_socket_server() and bound using the `STREAM_SERVER_BIND` flag to start listening on the socket. Connection-orientated transports (such as TCP) must use this flag, otherwise the server socket will not be enabled. Using this flag for connect-less transports (such as UDP) is an error.
`STREAM_NOTIFY_RESOLVE` *	A remote address required for this stream has been resolved, or the resolution failed. See `severity` for an indication of which happened.
`STREAM_NOTIFY_CONNECT`	A connection with an external resource has been established.
`STREAM_NOTIFY_AUTH_REQUIRED`	Additional authorization is required to access the specified resource. Typical issued with `severity` level of `STREAM_NOTIFY_SEVERITY_ERR`.
`STREAM_NOTIFY_MIME_TYPE_IS`	The `mime-type` of resource has been identified, refer to `message` for a description of the discovered type.
`STREAM_NOTIFY_FILE_SIZE_IS`	The `size` of the resource has been discovered.
`STREAM_NOTIFY_REDIRECTED`	The external resource has redirected the stream to an alternate location. Refer to `message`.
`STREAM_NOTIFY_PROGRESS`	Indicates current progress of the stream transfer in `bytes_transferred` and possibly `bytes_max` as well.
`STREAM_NOTIFY_COMPLETED` *	There is no more data available on the stream.
`STREAM_NOTIFY_FAILURE`	A generic error occurred on the stream, consult `message` and `message_code` for details.
`STREAM_NOTIFY_AUTH_RESULT`	Authorization has been completed (with or without success).
`STREAM_NOTIFY_SEVERITY_INFO`	Normal, non-error related, notification.
`STREAM_NOTIFY_SEVERITY_WARN`	Non critical error condition. Processing may continue.
`STREAM_NOTIFY_SEVERITY_ERR`	A critical error occurred. Processing cannot continue.
`STREAM_IPPROTO_ICMP` +	Provides a ICMP socket.
`STREAM_IPPROTO_IP` +	Provides a IP socket.
`STREAM_IPPROTO_RAW` +	Provides a RAW socket.
`STREAM_IPPROTO_TCP` +	Provides a TCP socket.
`STREAM_IPPROTO_UDP` +	Provides a UDP socket.
`STREAM_PF_INET` +	Internet Protocol Version 4 (IPv4).
`STREAM_PF_INET6` +	Internet Protocol Version 6 (IPv6).
`STREAM_PF_UNIX` +	Unix system internal protocols.
`STREAM_SOCK_DGRAM` +	Provides datagrams, which are connectionless messages (UDP, for example).
`STREAM_SOCK_RAW` +	Provides a raw socket, which provides access to internal network protocols and interfaces. Usually this type of socket is just available to the root user.
`STREAM_SOCK_RDM` +	Provides a RDM (Reliably-delivered messages) socket.
`STREAM_SOCK_SEQPACKET` +	Provides a sequenced packet stream socket.
`STREAM_SOCK_STREAM` +	Provides sequenced, two-way byte streams with a transmission mechanism for out-of-band data (TCP, for example).

Note: The constants marked with * are just available since PHP 5.0.0.

Note: The constants marked with + are available since PHP 5.1.0 and are meant to be used with stream_socket_pair(). Please note that some of these constants might not be available in your system.

Stream Errors

As with any file or socket related function, an operation on a stream may fail for a variety of normal reasons (i.e.: Unable to connect to remote host, file not found, etc...). A stream related call may also fail because the desired stream is not registered on the running system. See the array returned by stream_get_wrappers() for a list of streams supported by your installation of PHP. As with most PHP internal functions if a failure occurs an E_WARNING message will be generated describing the nature of the error.

Examples

Example 1. Using file_get_contents() to retrieve data from multiple sources


<?php
/* Read local file from /home/bar */
$localfile = file_get_contents("/home/bar/foo.txt");

/* Identical to above, explicitly naming FILE scheme */
$localfile = file_get_contents("file:///home/bar/foo.txt");

/* Read remote file from www.example.com using HTTP */
$httpfile  = file_get_contents("http://www.example.com/foo.txt");

/* Read remote file from www.example.com using HTTPS */
$httpsfile = file_get_contents("https://www.example.com/foo.txt");

/* Read remote file from ftp.example.com using FTP */
$ftpfile   = file_get_contents("ftp://user:pass@ftp.example.com/foo.txt");

/* Read remote file from ftp.example.com using FTPS */
$ftpsfile  = file_get_contents("ftps://user:pass@ftp.example.com/foo.txt");
?>

Example 2. Making a POST request to an https server


<?php
/* Send POST request to https://secure.example.com/form_action.php
 * Include form elements named "foo" and "bar" with dummy values
 */

$sock = fsockopen("ssl://secure.example.com", 443, $errno, $errstr, 30);
if (!$sock) die("$errstr ($errno)\n");

$data = "foo=" . urlencode("Value for Foo") . "&bar=" . urlencode("Value for Bar");

fwrite($sock, "POST /form_action.php HTTP/1.0\r\n");
fwrite($sock, "Host: secure.example.com\r\n");
fwrite($sock, "Content-type: application/x-www-form-urlencoded\r\n");
fwrite($sock, "Content-length: " . strlen($data) . "\r\n");
fwrite($sock, "Accept: */*\r\n");
fwrite($sock, "\r\n");
fwrite($sock, "$data\r\n");
fwrite($sock, "\r\n");

$headers = "";
while ($str = trim(fgets($sock, 4096)))
  $headers .= "$str\n";

echo "\n";

$body = "";
while (!feof($sock))
  $body .= fgets($sock, 4096);

fclose($sock);
?>

Example 3. Writing data to a compressed file


<?php
/* Create a compressed file containing an arbitrarty string
 * File can be read back using compress.zlib stream or just
 * decompressed from the command line using 'gzip -d foo-bar.txt.gz'
 */
$fp = fopen("compress.zlib://foo-bar.txt.gz", "wb");
if (!$fp) die("Unable to create file.");

fwrite($fp, "This is a test.\n");

fclose($fp);
?>

Table of Contents
stream_context_create -- Create a streams context
stream_context_get_default -- Retreive the default streams context
stream_context_get_options -- Retrieve options for a stream/wrapper/context
stream_context_set_option -- Sets an option for a stream/wrapper/context
stream_context_set_params -- Set parameters for a stream/wrapper/context
stream_copy_to_stream -- Copies data from one stream to another
stream_filter_append -- Attach a filter to a stream
stream_filter_prepend -- Attach a filter to a stream
stream_filter_register -- Register a stream filter implemented as a PHP class derived from php_user_filter
stream_filter_remove -- Remove a filter from a stream
stream_get_contents -- Reads remainder of a stream into a string
stream_get_filters -- Retrieve list of registered filters
stream_get_line -- Gets line from stream resource up to a given delimiter
stream_get_meta_data -- Retrieves header/meta data from streams/file pointers
stream_get_transports -- Retrieve list of registered socket transports
stream_get_wrappers -- Retrieve list of registered streams
stream_register_wrapper -- Alias of stream_wrapper_register()
stream_select -- Runs the equivalent of the select() system call on the given arrays of streams with a timeout specified by tv_sec and tv_usec
stream_set_blocking -- Set blocking/non-blocking mode on a stream
stream_set_timeout -- Set timeout period on a stream
stream_set_write_buffer -- Sets file buffering on the given stream
stream_socket_accept -- Accept a connection on a socket created by stream_socket_server()
stream_socket_client -- Open Internet or Unix domain socket connection
stream_socket_enable_crypto -- Turns encryption on/off on an already connected socket
stream_socket_get_name -- Retrieve the name of the local or remote sockets
stream_socket_pair -- Creates a pair of connected, indistinguishable socket streams
stream_socket_recvfrom -- Receives data from a socket, connected or not
stream_socket_sendto -- Sends a message to a socket, whether it is connected or not
stream_socket_server -- Create an Internet or Unix domain server socket
stream_wrapper_register -- Register a URL wrapper implemented as a PHP class
stream_wrapper_restore -- Restores a previously unregistered built-in wrapper
stream_wrapper_unregister -- Unregister a URL wrapper

Php ref.stream Function syntax tag

ref.stream php code on this is provided for your study purpose, it will guide you to know how create and design a website using php. use it to practice and train your self online

Php ref.stream syntax tutorial

php tutorial guide and code design are for easy learning and programming. The code practice section provided at the top is for practising of this syntax. Use the code section up to practice your php programming online. Learning php is very easy, all you need is to use the examples on this site and practice them to perfect your skills.