bool curl_setopt ( resource ch, int option, mixed value )
Set an option for a CURL session identified by the
ch parameter. option
specifies which option to set, and
value specifies the value for the option given.
value should be a bool for the
following values of the option parameter:
Option
Set value to
Notes
CURLOPT_BINARYTRANSFER
TRUE to return the raw output when
CURLOPT_RETURNTRANSFER is used.
CURLOPT_CRLF
TRUE to convert Unix newlines to CRLF newlines
on transfers.
CURLOPT_DNS_USE_GLOBAL_CACHE
TRUE to use a global DNS cache. This option is
not thread-safe and is enabled by default.
CURLOPT_FAILONERROR
TRUE to fail silently if the HTTP code returned
is greater than 300. The default behavior is to return the page
normally, ignoring the code.
CURLOPT_FILETIME
TRUE to attempt to retrieve the modification
date of the remote document. You can then retrieve this value using
the CURLINFO_FILETIME option with
curl_getinfo().
CURLOPT_FOLLOWLOCATION
TRUE to follow any
"Location: " header that the server sends as
part of the HTTP header (note this is recursive, PHP will follow as
many "Location: " headers that it is sent,
unless CURLOPT_MAXREDIRS is set).
CURLOPT_FORBID_REUSE
TRUE to force the connection to explicitly
close when it has finished processing, and not be pooled for reuse.
CURLOPT_FRESH_CONNECT
TRUE to force the use of a new connection
instead of a cached one.
CURLOPT_FTP_USE_EPRT
TRUE to use EPRT (and LPRT) when doing active
FTP downloads. Use FALSE to disable EPRT and LPRT and use PORT
only.
CURLOPT_FTP_USE_EPSV
TRUE to first try an EPSV command for FTP
transfers before reverting back to PASV. Set to FALSE
to disable EPSV.
CURLOPT_FTPAPPEND
TRUE to append to the remote file instead of
overwriting it.
CURLOPT_FTPASCII
An alias of
CURLOPT_TRANSFERTEXT. Use that instead.
CURLOPT_FTPLISTONLY
TRUE to only list the names of an FTP
directory.
CURLOPT_HEADER
TRUE to include the header in the output.
CURLOPT_HTTPGET
TRUE to reset the HTTP request method to GET.
Since GET is the default, this is only necessary if the request
method has been changed.
CURLOPT_HTTPPROXYTUNNEL
TRUE to tunnel through a given HTTP proxy.
CURLOPT_MUTE
TRUE to be completely silent with regards to
the CURL functions.
CURLOPT_NETRC
TRUE to scan your ~/.netrc
file to find your username and password for the remote site that
you're establishing a connection with.
CURLOPT_NOBODY
TRUE to exclude the body from the output.
CURLOPT_NOPROGRESS
TRUE to disable the progress meter for CURL transfers.
Note:
PHP automatically sets this option to TRUE, this should only be
changed for debugging purposes.
CURLOPT_NOSIGNAL
TRUE to ignore any CURL function that causes a
signal to be sent to the PHP process. This is turned on by default
in multi-threaded SAPIs so timeout options can still be used.
Added in CURL 7.10.
CURLOPT_POST
TRUE to do a regular HTTP POST. This POST is the
normal application/x-www-form-urlencoded kind,
most commonly used by HTML forms.
CURLOPT_PUT
TRUE to HTTP PUT a file. The file to PUT must
be set with CURLOPT_INFILE and
CURLOPT_INFILESIZE.
CURLOPT_RETURNTRANSFER
TRUE to return the transfer as a string of the
return value of curl_exec() instead of outputting
it out directly.
CURLOPT_SSL_VERIFYPEER
FALSE to stop CURL from verifying the peer's
certificate. Alternate certificates to verify against can be
specified with the CURLOPT_CAINFO option
or a certificate directory can be specified with the
CURLOPT_CAPATH option.
CURLOPT_SSL_VERIFYHOST may also need to be
TRUE or FALSE if
CURLOPT_SSL_VERIFYPEER is disabled (it
defaults to 2).
TRUE by default as of CURL 7.10. Default bundle installed as of
CURL 7.10.
CURLOPT_TRANSFERTEXT
TRUE to use ASCII mode for FTP transfers.
For LDAP, it retrieves data in plain text instead of HTML. On
Windows systems, it will not set STDOUT to binary
mode.
CURLOPT_UNRESTRICTED_AUTH
TRUE to keep sending the username and password
when following locations (using
CURLOPT_FOLLOWLOCATION), even when the
hostname has changed.
CURLOPT_UPLOAD
TRUE to prepare for an upload.
CURLOPT_VERBOSE
TRUE to output verbose information. Writes
output to STDERR, or the file specified using
CURLOPT_STDERR.
value should be an integer for the
following values of the option parameter:
Option
Set value to
Notes
CURLOPT_BUFFERSIZE
The size of the buffer to use for each read. There is no guarantee
this request will be fulfilled, however.
Added in CURL 7.10.
CURLOPT_CLOSEPOLICY
Either
CURLCLOSEPOLICY_LEAST_RECENTLY_USED or
CURLCLOSEPOLICY_OLDEST.
There are three other CURLCLOSEPOLICY_
constants, but CURL does not support them yet.
CURLOPT_CONNECTTIMEOUT
The number of seconds to wait whilst trying to connect. Use 0 to
wait indefinitely.
CURLOPT_DNS_CACHE_TIMEOUT
The number of seconds to keep DNS entries in memory. This
option is set to 120 (2 minutes) by default.
CURLOPT_FTPSSLAUTH
The FTP authentication method (when is activated):
CURLFTPAUTH_SSL (try SSL first),
CURLFTPAUTH_TLS (try TLS first), or
CURLFTPAUTH_DEFAULT (let CURL decide).
Added in CURL 7.12.2 and available since PHP 5.1.0
CURLOPT_HTTP_VERSION
CURL_HTTP_VERSION_NONE (default, lets CURL
decide which version to use),
CURL_HTTP_VERSION_1_0 (forces HTTP/1.0),
or CURL_HTTP_VERSION_1_1 (forces HTTP/1.1).
CURLOPT_HTTPAUTH
The HTTP authentication method(s) to use. The options are:
CURLAUTH_BASIC,
CURLAUTH_DIGEST,
CURLAUTH_GSSNEGOTIATE,
CURLAUTH_NTLM,
CURLAUTH_ANY, and
CURLAUTH_ANYSAFE.
You can use the bitwise | (or) operator to combine
more than one method. If you do this, CURL will poll the server to see
what methods it supports and pick the best one.
CURLAUTH_ANY is an alias for
CURLAUTH_BASIC | CURLAUTH_DIGEST | CURLAUTH_GSSNEGOTIATE | CURLAUTH_NTLM.
CURLAUTH_ANYSAFE is an alias for
CURLAUTH_DIGEST | CURLAUTH_GSSNEGOTIATE | CURLAUTH_NTLM.
CURLOPT_INFILESIZE
The expected size, in bytes, of the file when uploading a file to a
remote site.
CURLOPT_LOW_SPEED_LIMIT
The transfer speed, in bytes per second, that the transfer should be
below during CURLOPT_LOW_SPEED_TIME seconds
for PHP to consider the transfer too slow and abort.
CURLOPT_LOW_SPEED_TIME
The number of seconds the transfer should be below
CURLOPT_LOW_SPEED_LIMIT for PHP to consider
the transfer too slow and abort.
CURLOPT_MAXCONNECTS
The maximum amount of persistent connections that are allowed.
When the limit is reached,
CURLOPT_CLOSEPOLICY is used to determine
which connection to close.
CURLOPT_MAXREDIRS
The maximum amount of HTTP redirections to follow. Use this option
alongside CURLOPT_FOLLOWLOCATION.
CURLOPT_PORT
An alternative port number to connect to.
CURLOPT_PROXYAUTH
The HTTP authentication method(s) to use for the proxy connection.
Use the same bitmasks as described in
CURLOPT_HTTPAUTH. For proxy authentication,
only CURLAUTH_BASIC and
CURLAUTH_NTLM are currently supported.
Added in CURL 7.10.7 and PHP 5.1.0.
CURLOPT_PROXYPORT
The port number of the proxy to connect to. This port number can
also be set in CURLOPT_PROXY.
CURLOPT_PROXYTYPE
Either CURLPROXY_HTTP (default) or
CURLPROXY_SOCKS5.
Added in CURL 7.10.
CURLOPT_RESUME_FROM
The offset, in bytes, to resume a transfer from.
CURLOPT_SSL_VERIFYHOST
1 to check the existence of a common name in the
SSL peer certificate. 2 to check the existence of
a common name and also verify that it matches the hostname
provided.
CURLOPT_SSLVERSION
The SSL version (2 or 3) to use. By default PHP will try to determine
this itself, although in some cases you must set this manually.
CURLOPT_TIMECONDITION
How CURLOPT_TIMEVALUE is treated.
Use CURL_TIMECOND_IFMODSINCE to return the
page only if it has been modified since the time specified in
CURLOPT_TIMEVALUE. If it hasn't been modified,
a "304 Not Modified" header will be returned
assuming CURLOPT_HEADER is TRUE.
Use CURL_TIMECOND_ISUNMODSINCE for the reverse
effect. CURL_TIMECOND_IFMODSINCE is the
default.
Added in PHP 5.1.0.
CURLOPT_TIMEOUT
The maximum number of seconds to allow CURL functions to execute.
CURLOPT_TIMEVALUE
The time in seconds since January 1st, 1970. The time will be used
by CURLOPT_TIMECONDITION. By default,
CURL_TIMECOND_IFMODSINCE is used.
value should be a string for the
following values of the option parameter:
Option
Set value to
Notes
CURLOPT_CAINFO
The name of a file holding one or more certificates to verify the
peer with. This only makes sense when used in combination with
CURLOPT_SSL_VERIFYPEER.
CURLOPT_CAPATH
A directory that holds multiple CA certificates. Use this option
alongside CURLOPT_SSL_VERIFYPEER.
CURLOPT_COOKIE
The contents of the "Set-Cookie: " header to be
used in the HTTP request.
CURLOPT_COOKIEFILE
The name of the file containing the cookie data. The cookie file can
be in Netscape format, or just plain HTTP-style headers dumped into
a file.
CURLOPT_COOKIEJAR
The name of a file to save all internal cookies to when the
connection closes.
CURLOPT_CUSTOMREQUEST
A custom request method to use instead of
"GET" or "HEAD" when doing
a HTTP request. This is useful for doing
"DELETE" or other, more obscure HTTP requests.
Valid values are things like "GET",
"POST", "CONNECT" and so on;
i.e. Do not enter a whole HTTP request line here. For instance,
entering "GET /index.html HTTP/1.0\r\n\r\n"
would be incorrect.
Note:
Don't do this without making sure your server supports the custom
request method first.
CURLOPT_EGBSOCKET
Like CURLOPT_RANDOM_FILE, except a filename
to an Entropy Gathering Daemon socket.
CURLOPT_ENCODING
The contents of the "Accept-Encoding: " header.
This enables decoding of the response. Supported encodings are
"identity", "deflate", and
"gzip". If an empty string, "",
is set, a header containing all supported encoding types is sent.
CURLOPT_FTPPORT
The value which will be used to get the IP address to use
for the FTP "POST" instruction. The "POST" instruction tells
the remote server to connect to our specified IP address. The
string may be a plain IP address, a hostname, a network
interface name (under Unix), or just a plain '-' to use the
systems default IP address.
CURLOPT_INTERFACE
The name of the outgoing network interface to use. This can be an
interface name, an IP address or a host name.
CURLOPT_KRB4LEVEL
The KRB4 (Kerberos 4) security level. Any of the following values
(in order from least to most powerful) are valid:
"clear",
"safe",
"confidential",
"private"..
If the string does not match one of these,
"private" is used. Setting this option to NULL
will disable KRB4 security. Currently KRB4 security only works
with FTP transactions.
CURLOPT_POSTFIELDS
The full data to post in a HTTP "POST" operation.
CURLOPT_PROXY
The HTTP proxy to tunnel requests through.
CURLOPT_PROXYUSERPWD
A username and password formatted as
"[username]:[password]" to use for the
connection to the proxy.
CURLOPT_RANDOM_FILE
A filename to be used to seed the random number generator for SSL.
CURLOPT_RANGE
Range(s) of data to retrieve in the format
"X-Y" where X or Y are optional. HTTP transfers
also support several intervals, separated with commas in the format
"X-Y,N-M".
CURLOPT_REFERER
The contents of the "Referer: " header to be used
in a HTTP request.
CURLOPT_SSL_CIPHER_LIST
A list of ciphers to use for SSL. For example,
RC4-SHA and TLSv1 are valid
cipher lists.
CURLOPT_SSLCERT
The name of a file containing a PEM formatted certificate.
CURLOPT_SSLCERTPASSWD
The password required to use the
CURLOPT_SSLCERT certificate.
CURLOPT_SSLCERTTYPE
The format of the certificate. Supported formats are
"PEM" (default), "DER",
and "ENG".
Added in CURL 7.9.3.
CURLOPT_SSLENGINE
The identifier for the crypto engine of the private SSL key
specified in CURLOPT_SSLKEY.
CURLOPT_SSLENGINE_DEFAULT
The identifier for the crypto engine used for asymmetric crypto
operations.
CURLOPT_SSLKEY
The name of a file containing a private SSL key.
CURLOPT_SSLKEYPASSWD
The secret password needed to use the private SSL key specified in
CURLOPT_SSLKEY.
Note:
Since this option contains a sensitive password, remember to keep
the PHP script it is contained within safe.
CURLOPT_SSLKEYTYPE
The key type of the private SSL key specified in
CURLOPT_SSLKEY. Supported key types are
"PEM" (default), "DER",
and "ENG".
CURLOPT_URL
The URL to fetch. You can also set this when initializing a
session with curl_init().
CURLOPT_USERAGENT
The contents of the "User-Agent: " header to be
used in a HTTP request.
CURLOPT_USERPWD
A username and password formatted as
"[username]:[password]" to use for the
connection.
value should be an array for the
following values of the option parameter:
Option
Set value to
Notes
CURLOPT_HTTP200ALIASES
An array of HTTP 200 responses that will be treated as valid
responses and not as errors.
Added in CURL 7.10.3.
CURLOPT_HTTPHEADER
An array of HTTP header fields to set.
CURLOPT_POSTQUOTE
An array of FTP commands to execute on the server after the FTP
request has been performed.
CURLOPT_QUOTE
An array of FTP commands to execute on the server prior to the FTP
request.
value should be a stream resource (using
fopen(), for example) for the following values of the
option parameter:
Option
Set value to
Notes
CURLOPT_FILE
The file that the transfer should be written to. The default
is STDOUT (the browser window).
CURLOPT_INFILE
The file that the transfer should be read from when uploading.
CURLOPT_STDERR
An alternative location to output errors to instead of
STDERR.
CURLOPT_WRITEHEADER
The file that the header part of the transfer is written to.
value should be a string that is the name of a valid
callback function for the the following values of the
option parameter:
Option
Set value to
Notes
CURLOPT_HEADERFUNCTION
The name of a callback function where the callback function takes
two parameters. The first is the CURL resource, the second is a
string with the header data to be written. Using this callback
function, it becomes your responsibility to write the header data.
Return the number of bytes written.
CURLOPT_PASSWDFUNCTION
The name of a callback function where the callback function takes
three parameters. The first is the CURL resource, the second is a
string containing a password prompt, and the third is the maximum
password length. Return the string containing the password.
CURLOPT_READFUNCTION
The name of a callback function where the callback function takes
two parameters. The first is the CURL resource, and the second is a
string with the data to be read. Using this callback function, it
becomes your responsibility to read the data. Return the number of
bytes read. Return 0 to signal EOF.
CURLOPT_WRITEFUNCTION
The name of a callback function where the callback function takes
two parameters. The first is the CURL resource, and the second is a
string with the data to be written. Using this callback function, it
becomes your responsibility to write the data. Must return the exact
number of bytes written or this will fail.
Example 1.
Initializing a new CURL session and fetching a webpage
<?php // create a new CURL resource $ch = curl_init();
// set URL and other appropriate options curl_setopt($ch, CURLOPT_URL, "http://www.example.com/"); curl_setopt($ch, CURLOPT_HEADER, false);
// grab URL and pass it to the browser curl_exec($ch);
// close CURL resource, and free up system resources curl_close($ch); ?>
Php curl setopt Function syntax tag
curl setopt php code on this is provided for your study purpose, it will guide you to know how create and design a website using php. use it to practice and train your self online
Php curl setopt syntax tutorial
php tutorial guide and code design are for easy learning and programming. The code practice section provided at the top is for practising of this syntax. Use the code section up to practice your php programming online. Learning php is very easy, all you need is to use the examples on this site and practice them to perfect your skills.